Actisense Professional NMEA Buffer PRO-BUF-2 Typegodkjent

To OPTO-isolerte innganger og tolv ISO-Drive™-isolerte utganger.

PrisNOK7 691,00 ekskl. mva.
Artikkelnr.:
PRO-BUF-2
Produsent:
Actisense
  • Produktinfo
  • Tekniske Spesifikasjoner
  • Nedlastninger

PRO-BUF-2 er robust, med hus i rustfritt stål.  Bufferen har  isolasjon på alle innganger og utganger. Med to NMEA 0183-innganger, tolv NMEA 0183-utganger, en toveis seriell port og en Ethernet-port, er PRO-BUF-2 en perfekt løsning for større fritidsfartøy, kommersiell frakt og er et flott tillegg for systemer som krever type- godkjente enheter.

  • 4800 to 115200 bps
  • 10 to 35 V DC
  • 325mA max @ 12V DC (all outputs @ full
    drive into 100 ohm loads)
  • Continuous reverse polarity, transient
    overvoltage and ESD protection
  • IEC 60945:2002-08, DNVGL-CG-0339:2019 & IACS UR E10 Rev7
  • RINA certificated

Power Supply
Input Supply Voltage 10 to 35 V DC
Input Supply Current 325mA max @ 12V DC (all outputs @ full drive into 100 ohm loads)
Input Protection Continuous reverse polarity, transient overvoltage and ESD protection
Power Indicator LED, Blue – indicates unit is functioning correctly
Input Supply Connector Pluggable 2-way screw terminal, 5.08mm pitch
NMEA 0183 Port – Listener & Talker
Number of Listener / Input Ports 2  isolated NMEA 0183 Listeners
Number of Talker / Output Ports 12 isolated NMEA 0183 Talkers
Compatibility Fully NMEA 0183, RS422 & RS232 compatible. RS485 Listener compatible
Speed / baud rate 4800 to 38400 bps
Talker Output Voltage Drive >= 2.2V (differential) into 100 ohm
Talker Output Current Drive 20 mA maximum per output
Talker Output Protection Short circuit and ESD
Talker Data Indicator LED, Orange (Flashes at data rate)
Listener Input Voltage Tolerance -15 V to +15 V continuous, -35 V to +35 V short term (< 1 second)
Listener Input Protection Current limited, overdrive protection to 40 VDC and ESD protection
Listener Data Indicator LED, Green (Flashes to indicate valid input)
Connectors Pluggable 2/3-way screw terminals, 5.08mm pitch
Serial Port
Compatibility RS422 & RS232 compatible. RS485 Listener compatible
Speed / baud rate 4800 to 115200 bps
Output Voltage Drive >= 2.1V (differential) into 100 ohm
Output Current Drive 20 mA max.
Output Protection Short circuit and ESD
Input Voltage Tolerance -15 V to +15 V continuous, -35 V to +35 V short term (< 1 second)
Input Protection Current limited, overdrive protection to 40 VDC and ESD protection
Data Indicators LED’s: Green = Receive, Orange = Transmit
Connectors Pluggable 3-way screw terminals, 5.08mm pitch
Ethernet Port
Host Interface 10/100BaseT, automatic polarity detection
Supported Protocols TCP/IP for configuration and firmware updating
TCP/IP and UDP for NMEA 0183 comms
Indicators Green = Link/Activity, Yellow = 100 Mbps
Connector RJ45
Isolation
NMEA 0183 Listener OPTO-Isolated, Hi-Pot tested to 1000V
NMEA 0183 Talker Uses IsoDriveTM, Hi-Pot tested to 1000V
Serial Port Uses IsoDriveTM, Hi-Pot tested to 1000V
Alarm Relay Hi-Pot tested to 1000V
Ethernet Port 2kV for 60s
Mode Inputs
Input Voltage Range 0 to 35V DC
Protection Transient overvoltage and ESD protection
Connectors Pluggable 2-way screw terminals, 5.08mm pitch
Alarm Output
Contacts Common, Normally Open and Normally Closed
Alarm Indicator LED, Red indicates a valid alarm condition
Contact Ratings 35VAC / 50VDC
Connectors Pluggable 3-way screw terminals, 5.08mm pitch
Mechanical
Housing Material 316 Stainless Steel
Dimensions 210mm (W) x 128mm (H) x 27mm (D)
Weight 530g
Mounting Bulkhead mount or DIN rail mount (DIN kit 1)
Approvals and Certifications
EMC IEC 60945:2002-08, DNVGL-CG-0339:2019 & IACS UR E10 Rev7
Compass Safe Distance 750mm
Type Approval Certificate RINA
Operating Temperature -25 to +70°C
Storage Temperature -40 to +85°C
Relative Humidity (RH) 95% @ 55°C
Environmental Protection IP40
Guarantee 5 Years