Actisense PRO-MUX-2 Professional NMEA 0183 Intelligent Multiplexer

PrisNOK8 839,00 ekskl. mva.
Ønskeliste
Artikkelnr.:
PRO-MUX-1-S
Produsent:
Actisense
  • Produktinfo
  • Video
  • Teknisk spesifikasjoner
  • Nedlastning

 

PRO-MUX-2 Professional NMEA 0183 Intelligent Multiplexer

Eight OPTO-isolated inputs and six ISO-Drive™isolated outputs. Offering device protection and excellent flexibility, all in one product.

Introducing the Actisense® PRO-MUX-2, the intelligent, type-approved PRO range multiplexer.

The PRO-MUX-2 is rugged, with a stainless steel housing, and provides isolation on all inputs and outputs. With eight NMEA 0183 inputs, six NMEA 0183 outputs, a bi-directional serial port and an Ethernet port, the PRO-MUX-2 is a perfect solution for larger leisure vessels, commercial shipping and is a great addition for systems that require type-approved devices.

The PRO-MUX-2 is designed to suit the majority of NMEA 0183 systems, from leisure through to class vessels.

Features

  • 8 OPTO-isolated NMEA 0183 inputs
  • 6 ISO-Drive NMEA 0183 outputs
  • Bi-directional isolated serial port (can be used for additional NMEA 0183 input/ output)
  • 0183 streaming via Ethernet
  • Alarm output (N/O and N/C contacts)
  • Designed for 12- and 24-Volt supply
  • Isolation to battery supply
  • Configurable input and output baud rates for rate conversion
  • Data combining from any input to any output
  • 2 independent Autoswitch virtual inputs with priority
  • Advanced sentence-based filtering / routing
  • Diagnostic LEDs on all inputs and outputs
  • Alarm, mode and Bi-colour Status LED’s
  • 2-part pluggable connector system supports both screw and screwless terminals
  • DIN rail or Panel mountable
  • Advanced statistics are available via a Web Browse

Benefits

  • Quick and easy to install
  • Configuration using standard web browser, no PC operating system compatibility issues
  • Advanced features solve NMEA 0183 data routing problems
  • Fully isolated with ISO-Drive technology for peace of mind
  • Easy firmware updates makes the device future-proof

 

D

Power Supply
Input supply voltage 9 to 35 V DC
Input supply current 250mA max @ 12V DC (all outputs @ full drive into 100 ohm loads)
Input protection Continuous reverse polarity, transient overvoltage and ESD protection
Power indicator LED, Blue – indicates unit is functioning correctly
 

 

  
NMEA 0183 Port – Listener & Talker
Number of Listener / input ports 8 isolated NMEA 0183 Listeners
Number of Talker / output ports 6 isolated NMEA 0183 Talkers
Compatibility Fully NMEA 0183, RS422 & RS232 compatible. RS485 Listener compatible
Electrical isolation 2500 V input to ground, 1500 V output to ground using ISO-Drive™
Speed / baud rate In1 to In4: up to 38400 bps In5 to In8: 4800 bps Out1: up to 115200 bps Out2 to Out6: up to 38400 bps
Talker output voltage drive >= 2.1V (differential) into 100 ohm
Talker output current drive 20 mA maximum per output
Talker output protection Short circuit and ESD
Listener input voltage tolerance -15 V to +15 V continuous, -35 V to +35 V short term (< 1 second)
Listener input protection Current limited, overdrive protection to 40 VDC and ESD protection
Listener data indicator LED, Green (Flashes to indicate valid input)
Talker data indicator LED, Orange (Flashes at data rate)
Status indicator LED, Green / Yellow / Red to indicate status (see user manual)
 

 

  
Serial Port
Number of input ports 1 isolated input
Number of output ports 1 isolated output
Compatibility RS422 & RS232 compatible. RS485 Listener compatible
Electrical isolation 2500 V input to ground 1500 V output to ground using ISO-Drive™
Speed / baud rate 115200 bps
Output voltage drive >= 2.1V (differential) into 100 ohm
Output current drive 20 mA max.
Output protection Short circuit and ESD
Input voltage tolerance -15 V to +15 V continuous, -35 V to +35 V short term (< 1 second)
Input protection Current limited, overdrive protection to 40 VDC and ESD protection
 

 

  
Ethernet Port
Host interface 10/100BaseT, automatic polarity detection
Supported protocols TCP/IP for configuration and firmware updating
Connector RJ45
Electrical isolation 2kV
Indicators Green – Link, Yellow – 100 Mbps
 

 

  
Mode Inputs
Input voltage range 0 to 35V DC
Protection Transient overvoltage and ESD protection
 

 

  
Alarm Output
Contacts Normally open and normally closed*
Electrical isolation 1000V between power supply and contacts
Alarm indicator LED, red indicates a valid alarm condition
 

 

  
Mechanical
Housing material Polycarbonate / ABS blend
Flame retardancy UL94 – V0
Weight 270g including all screw plugs & shield screw
Mounting DIN rail mount (35mm top hat rail EN 50 022)
Compass safe distance 250mm
Wiring terminals Pluggable 2/3 way screw or screwless connectors, 5mm pitch, 12 to 30 AWG
 

 

  
Approvals and Certifications
EMC IEC 60945 (sections 9, 10 & 11)
CE 2014/30/EU
Environmental protection IP43
Operating temperature -15°C to +55°C
Storage temperature -40°C to +85°C
Relative Humidity (RH) 0 – 80% RH
Guarantee 5 years