Actisense PRO-BUF-1 Professional NMEA 0183 Buffer

PrisNOK8 164,00 inkl. mva.
På lager
Artikkelnr.:
PRO-BUF-1-S
Produsent:
Actisense
  • Produktinfo
  • Teknisk spesifikasjoner
  • Nedlastning
  • Video

PRO-BUF-1 er designet for å passe de fleste NMEA 0183-systemer.
 De manuelt konfigurerbare grunnleggende driftsmodusene inkluderer variasjoner av buffermodi, autoswitch-modus og kombinasjonsmodus.

For å gjøre installasjonen rask og enkel, har PRO-BUF-1 todelte pluggbare kontakter som tillater bruk av skrue eller skrueløse terminaler, og en profesjonell monteringsmekanisme for DIN-skinne (DIN-skinne inkludert).

Nyttige lysdioder indikerer strøm, data inn, data ut og alarmstatus for å hjelpe diagnostikken.

Standard konfigurasjon med pluggbare skrueløse terminaler.

 

 

  • 2 OPTO-isolated NMEA 0183 inputs
  • 12 ISO-Drive™ NMEA 0183 outputs
  • Bi-directional isolated serial port (can be used for additional NMEA 0183 input/output)
  • Ethernet port
  • Alarm output (N/O and N/C contacts)
  • Designed for 12 and 24 Volt supply
  • Isolation to battery supply
  • Browser based configuration tool
  • Automatic baud rate matching on inputs
  • Independently configurable outputs Provides data combining and autoswitching of inputs
  • Alarm and Mode LED’s
  • 2 part pluggable connector system supports both screw and screwless terminals
  • DIN rail or Panel mountable
  • Advanced statistics are available via a Web Browser

 

Power Supply  
Input supply voltage 10 to 35 V DC
Input supply current 325mA max @ 12V DC (all outputs @ full drive into 100 ohm loads)
Input protection Continuous reverse polarity, transient overvoltage and ESD protection
Power indicator LED, Blue – indicates unit is functioning correctly
   

 

NMEA 0183 Port – Listener & Talker
Number of Listener / input ports 2  isolated NMEA 0183 Listeners
Number of Talker / output ports 12 isolated NMEA 0183 Talkers
Compatibility Fully NMEA 0183, RS422 & RS232 compatible. RS485 Listener compatible
Electrical isolation 2500 V input to ground, 1500 V output to ground using ISO-Drive™
Speed / baud rate 4800 to 38400 bps
Talker output voltage drive >= 2.1V (differential) into 100 ohm
Talker output current drive 20 mA maximum per output
Talker output protection Short circuit and ESD
Listener input voltage tolerance -15 V to +15 V continuous, -35 V to +35 V short term (< 1 second)
Listener input protection Current limited, overdrive protection to 40 VDC and ESD protection
Listener data indicator LED, Green (Flashes to indicate valid input)
Talker data indicator LED, Orange (Flashes at data rate)
   

 

Serial Port  
Number of input ports 1 isolated input
Number of output ports 1 isolated output
Compatibility RS422 & RS232 compatible. RS485 Listener compatible
Electrical isolation 2500 V input to ground 1500 V output to ground using ISO-Drive™
Speed / baud rate 4800 to 115200 bps
Output voltage drive >= 2.1V (differential) into 100 ohm
Output current drive 20 mA max.
Output protection Short circuit and ESD
Input voltage tolerance -15 V to +15 V continuous, -35 V to +35 V short term (< 1 second)
Input protection Current limited, overdrive protection to 40 VDC and ESD protection
 

 

 
Ethernet Port  
Host interface 10/100BaseT, automatic polarity detection
Supported protocols TCP/IP for configuration and firmware updating
TCP/IP and UDP for NMEA 0183 comms*
Connector RJ45
Electrical isolation 2kV
Indicators Green – Link, Yellow – 100 Mbps
 

 

 
Mode Inputs
 
Input voltage range 0 to 35V DC
Protection Transient overvoltage and ESD protection
 

 

 
Alarm Output
 
Contacts Normally open and normally closed*
Electrical isolation 1000V between power supply and contacts
Alarm indicator LED, red indicates a valid alarm condition
 

 

 
Mechanical  
Housing material Polycarbonate / ABS blend
Flame retardancy UL94 – V0
Weight 250g
Mounting DIN rail mount (35mm top hat rail EN 50 022)
Compass safe distance TBD
Wiring terminals Pluggable 2/3 way screw or screwless connectors, 5mm pitch, 12 to 30 AWG
 

 

 
Approvals and Certifications  
EMC IEC 60945 (sections 9 & 10)
CE 2004/108/EC
Environmental protection IP44
Operating temperature  -20°C to +70°C
Storage temperature  -40°C to +85°C
Relative Humidity (RH)  0 – 80% RH
Guarantee  5 years